WEBVTT

1
00:00:00.580 --> 00:00:03.940
When you start your pump, tap Start
on that Care Step.

2
00:00:03.980 --> 00:00:05.540
Tubular tracks the feed.

3
00:00:05.620 --> 00:00:07.300
It doesn't control your pump.

4
00:00:07.380 --> 00:00:10.980
From the rate in your plan, Tubular
estimates what's been given, so

5
00:00:11.020 --> 00:00:13.140
there's nothing to time or write
down.

6
00:00:13.260 --> 00:00:14.180
Paused your pump?

7
00:00:14.300 --> 00:00:17.620
Tap Pause here too, then Resume
when it restarts.

8
00:00:17.700 --> 00:00:19.500
Paused time isn't counted.

9
00:00:19.540 --> 00:00:21.220
You won't usually need Stop.

10
00:00:21.380 --> 00:00:23.540
Only tap it if you end the feed
early.

11
00:00:23.677 --> 00:00:26.500
When the planned amount is reached,
around when your pump beeps that

12
00:00:26.540 --> 00:00:29.860
the dose is done, Tubular completes
the step on its own.

13
00:00:29.900 --> 00:00:30.820
It's an estimate.

14
00:00:30.900 --> 00:00:33.700
If your pump shows something
different, you can correct it.

15
00:00:33.780 --> 00:00:35.620
A flush doesn't need tracking.

16
00:00:35.740 --> 00:00:37.620
After you give it, just tap Done.

17
00:00:37.700 --> 00:00:39.300
Both steps are recorded.

18
00:00:39.380 --> 00:00:42.900
If an amount or time was different,
tap Correct results to fix

19
00:00:42.980 --> 00:00:43.460
it.

20
00:00:43.540 --> 00:00:46.980
With Tubular Plus, pump detection
can track feeds for you.

21
00:00:47.060 --> 00:00:48.580
See the Pump detection guide.
